- Browse Catalog
-
Seals
- Inch...
-
Metric...
-
Wipers...
-
Pin Seals...
-
Rod Seals...
-
Rod U-Seal Back-Up Rings...
-
Buffer Seals...
-
Swivel Seals...
-
U-Seals...
-
V-Packing...
-
Piston U-Seals...
-
Piston Seal Assemblies...
-
Pneumatic Piston Seals...
-
Unitized Piston Seals...
-
Piston Rings...
-
Cushion Seals...
-
Wear Rings...
-
Oil Seals...
-
O-Rings...
-
Back-Up Rings...
-
Retainer Rings...
-
Miscellaneous...
-
Wipers...
- Kits & Tools
- Seal Kits
-
Seals
- SKF® Hydraulic Seals
- Engineered Plastics
- Materials
- Products
- Hydraulic Repair Kits
- Custom Machined Seals
- Request A Quote
- View Profiles
- View Materials
- View Quote
- Mechanical Seals
- Gaskets
- O-Rings
- Polyseals
- Accessories
- Customized Kits
- Industries
- Shop Now
View Custom Machined Seals Materials
Standard materials for the Sealmaster 400 are listed below.
ELASTOMERS
EPDM
Black. Sulfur-cured. Weather and ozone resistant. Not resistant to mineral oil or petroleum.
Hardness: 85 Shore A
Temperature range: -16°F to +302°F (steam)
Application: Hot water, steam, diluted acids.
FPM (Viton®)
Brown. High heat, chemical resistant.
Hardness: 85 Shore A
Temperature range: -4°F to+40
0°F
Application: O-rings, multi-use.
NBR (Nitrile, Buna)
Black. Abrasion resistant. compression-set resistant..
Hardness: 85 Shore A
Temperature range: -40°F to +212°F
Application: Hydraulic, pneumatic seals.
Other options
• NBR (white)
• H-NBR
• H-NBR (FDA approved)
• T-NBR (Low-temp)
• EPDM (FDA-approved)
• MVQ (Silicone)
• MVQ (Silicone FDA-approved)
• FPM (FDA-approved Viton®)
• TFE/P (Aflas®)
Plastics
PA (Nylon)
Dark gray. High pressure, extrusion resistant.
Hardness: 85 Shore D
Temperature range: -40°F to +212°F
Application: Guide rings, back-up rings
POM (Acetal)
White. High pressure, extrusion resistant.
Hardness: 85 Shore D
Temperature range: -40°F to +212°F
Application: Guide rings, back up rings
HPU (Polyurethane)
Red. Extremely abrasion resistant, extrusion and water resistant.
Hardness: 95 Shore A
Temperature range: -31°F to +230°F
Application: Hydraulic seals
Other Options
• CHPU (Cast Urethane-96A)
• CHPU (Cast Urethane-55D)
• CHPU (Cast Urethane-72D)
• LTPU (Low-temp Urethane)
• HTPU (Hi-temp Urethane)
• SLPU (with solid lubricants)
• Polypropylene
• UHMWPE
• Polyethylene
• 745 PEEK™
Filled PTFE
700
White. Inert. Chemical resistant. High friction. Food compatible, not FDA.
Hardness: 55 Shore D
Temperature range: -436°F to +500°F
Application: Slow speed, Cryogenics
701 (25% Glass)
White. Highly inert. High friction. Higher extrusion resistant.
Hardness: 62 Shore D
Temperature range: -436°F to +500°F
Application: Stem guide liners, bearings
702 (15% Glass 5% Moly)
Gray. Extreme extrusion resistance. High tear strength.
Hardness: 58 Shore D
Temperature range: -450°F to +550°F
Application: Dynamic sealing, high-temp
741 (40% Bronze)
Brown with pigments. Similar to 702. Excellent wear resistance. Higher specific gravity.
Hardness: 60 Shore D
Temperature range: -328°F to +500°F
Application: Hydraulics, high speed.
Other Options
• ETFE (Tefzel®)
• PCTFE
• 703 PPS Carbon, Moly/PTFE
• 706 (15% Glass/PTFE)
• 711 (25% Carbon/PTFE)
• 713 (60% Bronze/PTFE)
• 716 (15% Graphite/PTFE)
• 734 (10% Carbon/PTFE)
• 755 (10% Ekonol/PTFE)
• 756 (Polyamide/PTFE)
• 771 (Mineral Moly/PTFE)
• 782 (Carbon Fiber/PTFE)
• Rulon®