P50-5.00MB
Urethane Modular Back-up, 5 X 6 X 1/2
Part #:
P50-5.00MB
Min. Order Qty: 1
Brand: HPSI
HPSI
Modular Back-ups are made from hard polyurethane. Ideal for high pressures, they are commonly used as anti-extrusion backups for U-seals. Care should be taken for use in water hotter than 150 degrees. For even higher pressures and temperatures, hytrel is recommended.
| Cross Section | : | 1/2 in |
| Height | : | 1/2 in |
| Inside Diameter | : | 5 in |
| Material | : | 55D & 65D Urethane/Hytrel |
| Outside Diameter | : | 6 in |
| Part Number | : | (Prefix)(C/S)-(ID)-(H) |
| Temperature Range | : | -40° to 250°F |
- P-MB style
- U-seal modular back-up
- 55D & 65D Urethane/Hytrel
- etc.