RMU15-1.37-18N
RMU Homogenous Rubber U-Seal, 1-3/8 X 1-11/16 X 3/16
Part #:
RMU15-1.37-18N
Min. Order Qty: 1
Brand: HPSI
HPSI
The HMU Homogeneous Rubber U-Seal combines the pressure-compensating, uni-directional performance of a U-seal with the sealing effectiveness of a multi-lip design. Manufactured from homogeneous rubber, it provides reliable dry rod sealing while minimizing friction and maintaining an effective sealing edge as hydraulic pressure increases. HMU-N seals are molded from nitrile, while HMU-V seals are manufactured from fluorocarbon to accommodate a range of operating conditions.
| Cross Section | : | 5/32 in |
| Height | : | 3/16 in |
| Inside Diameter | : | 1-3/8 in |
| Material | : | 80A Nitrile |
| Outside Diameter | : | 1-11/16 in |
| Part Number | : | (Prefix)(CS)-(ID)-(H)(Suffix) |
| Pressure Range | : | 0 TO 1,000 PSI |
| Temperature Range | : | -40° to 250°F |
- Multi-lip design enhances sealing performance
- Pressure-compensating, uni-directional sealing action
- Maintains an effective sealing edge under increasing pressure
- Minimizes friction for smooth rod operation
- Available in Buna-N and Fluorocarbon materials
