HPSI
Made from bronze PTFE with a 70A nitrile O-ring, this seal absorbs the shock of pressure spikes, thus protecting the rod seal. NOTE: For higher temperatures, the nitrile O-ring in this seal can be replaced by a fluorocarbon O-ring for an additional charge. Please call for sizes not listed.
| Groove Diameter | : | 6.616 in |
| Inside Diameter | : | 6 in |
| Material | : | Bronze Filled PTFE/Rubber |
| Part Number | : | (Prefix)(C/S)(ID) |
| Pressure Range | : | 0 TO 5,000 PSI |
| Temperature Range | : | -65° to 220°F |
| Width | : | 0.235 in |
- BR style
- 2 piece buffer set
- Step cut
- Bronze cap
- Nitrile energizer
