H25-2.00-37
H O-Ring Loaded Urethane U-Seal, 2 X 2-1/2 X 3/8, Deep Style
Brand: HPSI
HPSI
The H O-Ring Loaded U-Seal is molded from tough, abrasion-resistant polyurethane for reliable hydraulic sealing in dynamic applications. An integrated O-ring expander maintains consistent sealing force across the operating pressure range while enhancing low-pressure sealing performance to help prevent leakage.
The Deep profile uses the same Type D sealing lip as the Standard profile but has a greater seal height than cross section, resulting in a rectangular geometry. This profile is designed for applications requiring a deeper seal configuration.
Typical Part Number: H25-2.50-37
| Cross Section | : | 1/4 in |
| Height | : | 3/8 in |
| Inside Diameter | : | 2 in |
| Lip Style | : | Deep |
| Material | : | Urethane/Nitrile |
| Outside Diameter | : | 2-1/2 in |
| Part Number | : | (Prefix)(C/S)-(ID)-(H) |
| Pressure Range | : | 0 TO 5,000 PSI |
| Temperature Range | : | -65° to 220°F |
- Rectangular profile accommodates deeper seal glands
- Type D sealing lip provides dependable hydraulic sealing
- O-ring expander maintains consistent sealing force across the pressure range
- Enhances low-pressure sealing to help prevent leakage ("weeping")
- Abrasion-resistant polyurethane withstands demanding applications
