P37-6.25-50
P Urethane U-Seal, 6-1/4 X 7 X 1/2, Deep Style
Brand: HPSI
HPSI
The P Polyseals are molded from abrasion-resistant 93A polyurethane and designed for reliable hydraulic sealing in dynamic applications. A four-lobed expander ring energizes the sealing lips, even at zero pressure, helping prevent leakage when the system is idle. Optional SKF® 93A high-temperature urethane and SKF® 95A premium urethane materials are available for demanding operating conditions.
The Deep profile uses the same Type D sealing lip as the Standard profile but has a greater seal height than cross section, resulting in a rectangular geometry. This profile is designed for applications requiring a deeper seal configuration.
Typical Part Number: P25-2.50-37
| Cross Section | : | 3/8 in |
| Height | : | 1/2 in |
| Inside Diameter | : | 6-1/4 in |
| Lip Style | : | Deep |
| Material | : | Urethane/Nitrile |
| Outside Diameter | : | 7 in |
| Part Number | : | (Prefix)(C/S)-(ID)-(H) |
| Pressure Range | : | 0 TO 5,000 PSI |
| Temperature Range | : | -65° to 220°F |
- Rectangular profile accommodates deeper seal glands
- Type D sealing lip provides dependable hydraulic sealing
- Four-lobed expander ring maintains sealing at zero pressure
- Helps prevent leakage while the hydraulic system is idle
- Abrasion-resistant 93A polyurethane withstands demanding applications
